 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TIP36, TIP36A, TIP36B, TIP36C PNP SILICON POWER TRANSISTORS Copyright (c) 1997, Power Innovations Limited, UK JULY 1968 - REVISED MARCH 1997 q Designed for Complementary Use with the TIP35 Series 125 W at 25C Case Temperature B SOT-93 PACKAGE (TOP VIEW) 1 q q q q 25 A Continuous Collector Current 40 A Peak Collector Current Customer-Specified Selections Available E 3 Pin 2 is in electrical contact with the mounting base. MDTRAA C 2 absolute maximum ratings at 25C case temperature (unless otherwise noted) RATING TIP36 Collector-base voltage (IE = 0) TIP36A TIP36B TIP36C TIP36 Collector-emitter voltage (IB = 0) TIP36A TIP36B TIP36C Emitter-base voltage Continuous collector current Peak collector current (see Note 1) Continuous base current Continuous device dissipation at (or below) 25C case temperature (see Note 2) Continuous device dissipation at (or below) 25C free air temperature (see Note 3) Unclamped inductive load energy (see Note 4) Operating junction temperature range Storage temperature range Lead temperature 3.2 mm from case for 10 seconds NOTES: 1. 2. 3. 4. V EBO IC ICM IB Ptot Ptot 1/2LIC 2 Tj Tstg TL VCEO VCBO SYMBOL VALUE -80 -100 -120 -140 -40 -60 -80 -100 -5 -25 -40 -5 125 3.5 90 -65 to +150 -65 to +150 250 V A A A W W mJ C C C V V UNIT This value applies for tp 0.3 ms, duty cycle 10%. Derate linearly to 150C case temperature at the rate of 1 W/C. Derate linearly to 150C free air temperature at the rate of 28 mW/C. This rating is based on the capability of the transistor to operate safely in a circuit of: L = 20 mH, IB(on) = -0.4 A, RBE = 100 , VBE(off) = 0, RS = 0.1 , VCC = -20 V. PRODUCT INFORMATION Information is current as of publication date. Products conform to specifications in accordance with the terms of Power Innovations standard warranty. Production processing does not necessarily include testing of all parameters. 1 TIP36, TIP36A, TIP36B, TIP36C PNP SILICON POWER TRANSISTORS JULY 1968 - REVISED MARCH 1997 electrical characteristics at 25C case temperature PARAMETER Collector-emitter breakdown voltage TEST CONDITIONS TIP36 V (BR)CEO IC = -30 mA (see Note 5) VCE = -80 V ICES Collector-emitter cut-off current Collector cut-off current Emitter cut-off current Forward current transfer ratio Collector-emitter saturation voltage Base-emitter voltage Small signal forward current transfer ratio Small signal forward current transfer ratio V CE = -100 V V CE = -120 V V CE = -140 V ICEO IEBO hFE VCE(sat) VBE hfe VCE = -30 V V CE = -60 V VEB = VCE = V CE = IB = IB = VCE = V CE = -5 V -4 V -4 V -1.5 A -5 A -4 V -4 V VBE = 0 V BE = 0 V BE = 0 V BE = 0 IB = 0 IB = 0 IC = 0 IC = -1.5 A IC = -15 A IC = -15 A IC = -25 A IC = -15 A IC = -25 A IC = IC = -1 A -1 A (see Notes 5 and 6) (see Notes 5 and 6) (see Notes 5 and 6) f = 1 kHz f = 1 MHz 25 3 25 10 50 -1.8 -4 -2 -4 V V IB = 0 TIP36A TIP36B TIP36C TIP36 TIP36A TIP36B TIP36C TIP36/36A TIP36B/36C MIN -40 -60 -80 -100 -0.7 -0.7 -0.7 -0.7 -1 -1 -1 mA mA mA V TYP MAX UNIT VCE = -10 V VCE = -10 V |hfe| NOTES: 5. These parameters must be measured using pulse techniques, tp = 300 s, duty cycle 2%. 6. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. thermal characteristics PARAMETER RJC RJA Junction to case thermal resistance Junction to free air thermal resistance MIN TYP MAX 1 35.7 UNIT C/W C/W resistive-load-switching characteristics at 25C case temperature PARAMETER ton toff TEST CONDITIONS IC = -15 A V BE(off) = 4.15 V IB(on) = -1.5 A RL = 2 MIN IB(off) = 1.5 A tp = 20 s, dc 2% TYP 1.1 0.8 MAX UNIT s s Turn-on time Turn-off time Voltage and current values shown are nominal; exact values vary slightly with transistor parameters. PRODUCT INFORMATION 2 TIP36, TIP36A, TIP36B, TIP36C PNP SILICON POWER TRANSISTORS JULY 1968 - REVISED MARCH 1997 TYPICAL CHARACTERISTICS TYPICAL DC CURRENT GAIN vs COLLECTOR CURRENT 1000 VCE = -4 V TC = 25C tp = 300 s, duty cycle < 2% TCS636AA COLLECTOR-EMITTER SATURATION VOLTAGE vs BASE CURRENT VCE(sat) - Collector-Emitter Saturation Voltage - V -10 TCS636AB hFE - DC Current Gain 100 -1*0 10 -0*1 IC = -25 A IC = -20 A IC = -15 A IC = -10 A -0*1 -1*0 -10 -100 1 -0*1 -1 -10 -100 -0*01 -0*001 IC = -300 mA IC = -1 A IC = -3 A -0*01 IC - Collector Current - A IB - Base Current - A Figure 1. Figure 2. BASE-EMITTER VOLTAGE vs COLLECTOR CURRENT -1*8 VCE = -4 V TC = 25C TCS636AC VBE - Base-Emitter Voltage - V -1*6 -1*4 -1*2 -1*0 -0*8 -0*6 -0*1 -1*0 -10 -100 IC - Collector Current - A Figure 3. PRODUCT INFORMATION 3 TIP36, TIP36A, TIP36B, TIP36C PNP SILICON POWER TRANSISTORS JULY 1968 - REVISED MARCH 1997 MAXIMUM SAFE OPERATING REGIONS MAXIMUM FORWARD-BIAS SAFE OPERATING AREA -100 SAS636AA IC - Collector Current - A -10 tp = 300 s, d = 0.1 = 10% tp = 1 ms, d = 0.1 = 10% tp = 10 ms, d = 0.1 = 10% DC Operation -1*0 -0*1 TIP36 TIP36A TIP36B TIP36C -10 -100 -1000 -0*01 -1*0 VCE - Collector-Emitter Voltage - V Figure 4. THERMAL INFORMATION MAXIMUM POWER DISSIPATION vs CASE TEMPERATURE 140 Ptot - Maximum Power Dissipation - W TIS635AA 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TC - Case Temperature - C Figure 5. PRODUCT INFORMATION 4 TIP36, TIP36A, TIP36B, TIP36C PNP SILICON POWER TRANSISTORS JULY 1968 - REVISED MARCH 1997 MECHANICAL DATA SOT-93 3-pin plastic flange-mount package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. SOT-93 4,90 4,70 o 4,1 4,0 15,2 14,7 3,95 4,15 1,37 1,17 16,2 MAX. 12,2 MAX. 31,0 TYP. 18,0 TYP. 1 1,30 1,10 2 3 0,78 0,50 11,1 10,8 2,50 TYP. ALL LINEAR DIMENSIONS IN MILLIMETERS NOTE A: The centre pin is in electrical contact with the mounting tab. MDXXAW PRODUCT INFORMATION 5 TIP36, TIP36A, TIP36B, TIP36C PNP SILICON POWER TRANSISTORS JULY 1968 - REVISED MARCH 1997 IMPORTANT NOTICE Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the information being relied on is current. PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except as mandated by government requirements. PI accepts no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor is any license, either express or implied, granted under any patent right, copyright, design right, or other intellectual property right of PI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS. Copyright (c) 1997, Power Innovations Limited PRODUCT INFORMATION 6 |
Price & Availability of TIP36C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |